Wheelchair Preparation
Original Editor - Your name will be added here if you created the original content for this page.
Top Contributors - Vidya Acharya, Naomi O'Reilly, Laura Ritchie, Kim Jackson, Amrita Patro and Jess Bell
Introduction[edit | edit source]
Sub Heading 2[edit | edit source]
For the whole wheelchair | How to check | |
There are no sharp edges | Check all over the wheelchair with eyes and hands | |
No parts are damaged or scratched. | ||
The wheelchair travels in a straight line | Push the wheelchair away from you, making sure the castor wheels are in the “trail” position. | |
Front castor wheels | ||
Spin freely. | Tip the wheelchair on to the back wheels. Spin the castor wheels. | |
Spin without touching the fork. | ||
Bolts are tight. | Check. They should feel firm. Do not over tighten. | |
Front castor barrels | ||
Castor fork spins freely. | Tip the wheelchair on to the back wheels. Spin the castor fork around. | |
Rear wheels | ||
Spin freely. | Tip the wheelchair sideways on to one rear wheel. Spin the other wheel. Check the other side. | |
Axle bolts are tight. | Check. They should feel firm. Do not over tighten. | |
Tyres (if those are pneumatic) are inflated correctly. | Press on the tyres with your thumb. The wheel should depress a little, but no more than 5 mm. | |
Push rims are secure | Check | |
Brakes | ||
Function properly | Apply brakes. Check the wheelchair cannot be moved. | |
Footrests | ||
Footrests are securely attached. | Check. | |