Manual Muscle Testing: Shoulder Flexion: Difference between revisions

No edit summary
mNo edit summary
Line 67: Line 67:


=== Therapist Position ===
=== Therapist Position ===
* Standing on ipsilateral side
* Standing on ipsilateral side of the arm being tested
* No stabilzztion is necessary
* No stabilzation is necessary


=== How to perform the MMT: ===
=== How to perform the MMT: ===


* PT places patient supine on table with shoulder flexion in lateral rotation, with the elbow completely flexed and forearm supinated.  
* PT places patient supine on table in a hooklying position with the shoulder in flexion, external rotation, the elbow fully flexed and forearm in supination.  
* Therapist preforms PROM to show the patient the motion and to make sure they can achieve full range. The patient is then asked to actively perform the motion.  
* Therapist preforms PROM to introduce the motion to the patient and to make sure that they can achieve the desired range. The patient is then asked to actively perform the motion.
* The physical therapist applies pressure against the anteromedial surface of the distal humerus, in the direction of extension and slight abduction and asks the patient to resist the movement.  
* The physical therapist resets the patient to starting test positon and applies resistance against the anteromedial surface of the distal humerus, in the direction of extension and slight abduction.
* The patient attempts to not let the therapist move them by using a counteracting force of flexion and adduction.  


ADD VIDEO
ADD VIDEO

Revision as of 23:24, 3 April 2024

Welcome to Arkansas Colleges of Health Education School of Physical Therapy Musculoskeletal 1 Project. This space was created by and for the students at Arkansas Colleges of Health Education School in the United States. Please do not edit unless you are involved in this project, but please come back in the near future to check out new information!!

Introduction[edit | edit source]

The purpose of manual muscle testing (MMT), is to detect weakness and imbalances of a mucle or tendon. The initial MMT provides a baseline that initiates the restorative process of muscle strength, stability, and function via therapeutic exercise (strengthening).

Shoulder Flexion Osteokinematic and Arthrokinematic Movements:[edit | edit source]

From 0-60 degrees, the scapula and clavicle elevate the shoulder, while the humeral head begins to glide inferiorly and rotate posteriorly.

From 60-90 degrees, the humeral head is seated in the glenoid fossa and rotates posteriorly; while the clavicle and scapula continue to elevate, the scapula beings to upwardly rotate.

From 90-180 degrees, the scapula upwardly rotates, the clavicle posteriorly rotates, and the humeral head posteriorly rotates while remaining seated in the glenoid fossa.

Muscles Involved in Shoulder Flexion:[edit | edit source]

  • Deltoid (anterior)
  • Coracobrachialis
  • Biceps Brachii

Grading MMT:[edit | edit source]

Purpose:[edit | edit source]

The purpose of performing MMT’s

Break Test:[edit | edit source]

If the patient can actively hold against gravity, the examiner will gradually apply pressure perpendicular to the testing position. The test is considered over if the muscle being tested cannot maintain the origanal testing position, or if the patient begins to show any adverse signs/symptoms to the applied pressure. If the examiner is unable to break, or move, the patient out of testing position, the muscle strength is considered normal (5).

Grading:[edit | edit source]

  • MMT grades are given subjectively, from the examiner, based on the patients strength. The numerical system used represents the patient ability/inability to: (1) resist the examiners pressure (Fair 3+ and higher); (2) actively hold against gravity (Fair 3); or, (3) move through muscle range (fair 3- and lower).

Normal (5): Able to hold test position and resist strong pressure; examiner is unable to "break" the test position; > 95% effort from examiner.

Good (4+): Able to hold test position and resist moderate to strong pressure before muscle failure; 75-95% effort from examiner.

Good (4): Able to hold test position and resist moderate pressure before muscle failure; 50-74% effort from examiner.

Good (4-): Able to hold against gravity and resist slight to moderate pressure before muscle failure; 25-49% effort from examiner.

Fair (3+): Able to hold against gravity and resist minimal pressure before muscle failure; 1-24% effort from examiner.

Fair (3): Able to hold against gravity; no additional force applied.

Fair (3-): Unable to hold agaisnt gravity; patient gradually falls from test position.

Poor (2+): Unable to hold against gravity; achieves only partial ROM against gravity; in a gravity eliminated (GE)* postion, able to move through full ROM with resistance at end-range only.

Poor (2): Unable to hold against gravity; able to move through full ROM in a GE position.

Poor (2-): Unable to hold agasint gravity; able to move through partial range in a GE position.

Trace (1): No osteokinematic movement; examiner is able to palpate a contraction of the muscle/tendon.

Zero (0): No osteokinematic movement, visable, or palpable contraction of muscle or tendon.

What is Gravity Eliminated (GE)?[edit | edit source]
  • When testing weak muscles, patient must be positioned such that muscles are in a working position with gravity eliminate
  • Occurs in the Transverse plane

Coracobrachialis:[edit | edit source]

Patient Position:[edit | edit source]

  • Sitting or Supine

Therapist Position[edit | edit source]

  • Standing on ipsilateral side of the arm being tested
  • No stabilzation is necessary

How to perform the MMT:[edit | edit source]

  • PT places patient supine on table in a hooklying position with the shoulder in flexion, external rotation, the elbow fully flexed and forearm in supination.
  • Therapist preforms PROM to introduce the motion to the patient and to make sure that they can achieve the desired range. The patient is then asked to actively perform the motion.
  • The physical therapist resets the patient to starting test positon and applies resistance against the anteromedial surface of the distal humerus, in the direction of extension and slight abduction.
  • The patient attempts to not let the therapist move them by using a counteracting force of flexion and adduction.

ADD VIDEO

Anterior Deltoid:[edit | edit source]

Patient Position:[edit | edit source]

  • Sitting

Therapist Position:[edit | edit source]

  • Therapist stands behind the patient
  • Stabilizes the scapula

How to perform the MMT:[edit | edit source]

  • Shoulder is placed in approximately 60 degrees of abduction, slight flexion, and slight lateral rotation.
  • Therapist preforms PROM to show the patient the motion and to make sure they can achieve full range. The patient is then asked to actively perform the motion.
  • The physical therapist applies pressure against the anteromedial surface of the arm, in the direction of adduction and slight extension.
  • The patient is asked to resist the movement (meaning that the patient will be pushing into abduction and flexion).

ADD VIDEO

Biceps Brachii[edit | edit source]

Patient Position:[edit | edit source]

  • Supine or seated

Therapist Position[edit | edit source]

  • Standing on ipsilateral side of arm that is being tested
  • Stabilize on the ipsilateral elbow

How to perform the MMT:[edit | edit source]

  • Physical therapist places the patients shoulder and elbow in slight flexion and the forearm in full supination.
  • Physical therapist then actively moves the patient into complete elbow flexion, then asks the patient to repeat the same motion passively.
  • Patient is returned to the starting test position. The physical therapist stabilizes the elbow with one hand and wraps their fingers around the distal ventral side of the patients forearm.
  • The physical therapist attempts to pull in patient into elbow extension.
  • The patient attempts to not let the physical therapist move them by pulling into elbow flexion.

ADD VIDEO

References[edit | edit source]